Price:Unfilled

Send inquiry

Model C5112/C5116/C5120,C5123/C5126 single column vertical lathe is composed of column, main gearbox, worktable, beam lifting mechanism, vertical tool post, electrical system, hydraulic system, etc. The main gearbox is closed inside the column, and the worktable is closed in front of the column. The beam moves up and down on the column guide rail. There is a vertical tool post on the beam, which can feed and move quickly in both horizontal and vertical directions. The main movement is driven by an AC motor. The machine tool has a button station, and all operations on the machine tool are concentrated on the button station.

 

 

Specification		Unit	C5112	C5116	C5120	C5123	C5126
Max.cutting diameter of vertical tool post		mm	1250	1600	2000	2300	2600
Max.cutting diameter of side tool post		mm	1100	1400	1800	2000	2400
Max.cutting height		mm	1000	1000/1400	1250	1350	1600
Work table	diameter	mm	1000	1400	1800	2000	2250
	max. loading	t	3.2	5	8	8	10
	speed range	rpm	6.3-200	5-160	3.2-100	3.2-100	2-63
	step range	step	16	16	16	16	16
	max. torque	kn. m	17.5	25	25	25	35
Vertical tool post	feeding rang	mm/min	0.8-86	0.8-86	0.8-86	0.8-86	0.8-86
	feed steps	step	12	12	12	12	12
	cutting force	kn	20	25	25	25	25
	vertical travel	mm	650	800/1000	800/1000	800/1000	1000
	horizontal travel	mm	700	915	1200	1300	1500
	swing angle	°	±30	±30	±30	±30	±30
Side tool post	feed range	mm/min	0.8-86	0.8-86	0.8-86	0.8-86	0.8-86
	cutting force	kn	20	20	20	20	20
	vertical travel	mm	900	900	900	900	900
	horizontal travel	mm	630	630	630	630	630
Vertical (side) turret rapid travel speed		m/min	1.8	1.8	1.55	1.55	1.55
Cross beam travel		mm	650	650/1050	850	1050	1250
Beam lifting speed		mm/min	350	350	350	350	320
Tool bar section size		mm	30*40	30*40	40*40	40*40	40*40
Feed motor power		kw	1.3/1.8	1.3/1.8	1.3/1.8	1.3/1.8	1.3/1.8
Main motor		kw	22	30	30	30	37
Machine weight		t	8.5	12.4/14.8	17	18	26/28
Overall dimension(L*W*H)		mm	2360*2280 *2800	2830*2670 *3010	3200*2800 *3250	3210*2850 *3300	3300*4000 *3500

 

 

This series of machine tools is a program-controlled single-column vertical lathe. Controlled by domestic servo system. Tool post movement is with two coordinate axes that can be linked, X and Z. Both use AC servo motors to drive the tool post (X axis) and the ram (Z axis) to move through the high-precision ball screws. In order to protect against power failure, the Z-axis motor is equipped with a brake. The tool post and ram moving guide rails adopts wear-resistant soft belt/scraped boron cast iron, which improves the wear resistance of the guide rail and has stable and reliable accuracy. The lubrication of the tool post guide rail adopts a centralized lubrication station fixed-range quantitative automatic lubrication system, and the stainless steel protective plate has a beautiful and clean appearance. The main drive is driven by the main motor, and the worktable is driven by a gear box, with hydraulic parking and shifting. The spindle of the worktable is equipped with a high-precision double-row cylindrical roller bearing whose inner ring has a taper, and the radial clearance can be adjusted to ensure the spindle to work smoothly at high speeds. The beam is enlarged by a hydraulic cylinder through a lever, and the inclined iron is pushed to firmly clamp the beam on the column. Loosen the inclined iron and turn on the beam lifting motor to move the beam to a suitable processing position. The machine control panel is placed on the protective cover, and various information commands and data required can be displayed on the LCD.

 

The vertical column is connected with the base of the worktable, and its material is made of high-strength, low-stress cast iron, and a beam lifting mechanism is provided at the upper end of the column. Driven by an AC motor, the beam moves up and down on the vertical column.

 

The crossbeam moves up and down on the column guide rail, and the crossbeam beam is raised and lowered by a single screw. A safety floating nut device is installed on the beam to ensure accurate, safe and reliable work during the lifting process of the beam. The beam is enlarged on the column by a hydraulic cylinder through a lever and pushed by the inclined iron to clamp or loosen it. The clamping mechanism has the characteristics of simple structure and convenient maintenance and operation.

Single column vertical lathe is suitable for high-speed steel cutter, carbide cutter and all kinds of high performance cutter, which can make rough and finish turning for inside and outside cylindrical, conical, end face, grooving and etc.

 

 

http://www.haidimachinery.com/